Choose an application and explore its layout, section and key connections. Seven applications, each with its own model.
These concepts show installation scope and points to agree with the designer. We adapt dimensions and parameters to the project documentation.
A-01 · Rack layout, equipment fronts, access, partitions and section A–A location.
Download the SVG sheetDemonstration concept. Dimensions are model assumptions, not standard requirements. A specific project requires system selection and coordination between disciplines.
The sandwich panel envelope, partitions, connections and flashings within the agreed documentation scope. These are highlighted in blue on the sheets.
Send your envelope designIT racks, cooling, power, service routes, detection and fire suppression, access control and aisle containment remain separate scopes. We coordinate door openings and penetrations with the relevant trades.
A diagram does not establish fire resistance, cleanliness classification or certification. Selection is specific to the configuration and project.
Manufacturer materials and industry sources used to develop this scope. Model dimensions are our own demonstration assumptions.
A-01 and A-02: opposing rack fronts and maintenance aisles; original geometry, not copied drawings.
No universal temperature or humidity is specified. Only an air-cooling example is assumed.
Panel layers, support, openings and independent suspensions. Fixing dimensions have not been applied to an unspecified product.
No invented EI classification or assignment to a specific Kingspan model. Reaction to fire is not the same as fire resistance.
P1 is a coordination interface; no Hilti/Paroc detail is marked as compatible with Kingspan.
No Tier III/IV or other rating is assigned to the envelope diagram.
Select a scope and compare its connections with your project documentation. The sheets show concepts, not construction documents or technical specifications.
Envelope layout on a prepared structure: panels, supports, openings and base and reveal connections.
Panel Montage scope: Installation of panels and agreed flashings on a prepared structure.
To agree with other trades: The load-bearing structure, foundations, windows, doors and their fittings remain subject to coordination with the relevant trades.
Rooms within a hall, connections between zones and an independently supported ceiling.
Panel Montage scope: Panel partitions, agreed ceilings, connections and flashings.
To agree with other trades: The supporting building structure, doors, services and equipment require separate coordination.
Panel arrangement, support positions, roof falls and edge closures.
Panel Montage scope: Installation of roof sandwich panels and agreed flashings.
To agree with other trades: The structure, drainage and load calculations are coordinated with the relevant disciplines. The model does not cover a flat membrane roof.
An envelope that connects insulated walls and ceiling with the floor, doors and refrigeration system. The plan shows access to the room, the section shows layer continuity and the details show key interfaces.
Panel Montage scope: Installation of the panel envelope, connections and flashings within the scope agreed for the project.
To agree with other trades: Responsibilities must be allocated for the floor, refrigeration, suspension structure, door selection and controls. The diagram does not imply that PM supplies all these systems.
A freezer room envelope must also be coordinated with ground protection, heated door frames and pressure equalisation. A separate model shows where these systems meet the sandwich panels.
Panel Montage scope: The freezer room panel envelope, interfaces and openings in accordance with the project documentation.
To agree with other trades: H1 ground protection, H2 frame heating, V1 pressure equalisation, refrigeration and controls are separate scopes to coordinate. We do not assign them to PM without a separate agreement.
A smooth cleanroom envelope with clearly separated personnel and material access. The drawings show airlocks, the ceiling, hygienic junctions and service coordination points.
Panel Montage scope: Panel envelope, system connections and finishes, plus openings coordinated with the project’s process design.
To agree with other trades: Process design, HVAC, filtration, pressure balance and cascade, door interlocks, services, floor and validation require separate agreements. PM does not declare a cleanliness class based on the envelope alone.
Rack layout, access and maintenance space coordinated with the envelope and service penetrations.
Panel Montage scope: Sandwich panel envelope, partitions, connections and flashings within the agreed documentation scope.
To agree with other trades: IT, cooling, power, service routes, detection, fire suppression and aisle containment remain separate scopes.
